Archive

17 Sep T 200

Posted at 05:53h in

The Terex^® T Range are mobile bucket wheel dewaterers complete with fines retention screw, twin bucket wheel designed units for the removal of clays, silts and slimes to produce up to 2 grades of sand.
The T Range is designed to operate with maximum versatility and can support different requirements such as maximum retention of fines or maximum disposal of fines.
The T Range can be driven hydraulically from the M Range or from its own optional electric power pack.

•Can produce up to 1 grade of sand
• Designed to operate with maximum versatility and can support different requirements such as maximum retention of fines or maximum disposal of fines
• Can be driven hydraulically from the Mobile M Range or from its own optional electric power pack

Benefits

• Hydraulic drive from Mobile M Range
• 4.57m (15’) diameter bucket wheel (tandem buckets)
• 2.05m (6’9”) diameter fines recovery spiral 4.3m (14’3”) long
• Independent variable speed control on both bucket wheeland spiral
• 54nr 635mm (25”) wide corrosion resistant bucket meshes
(10 x 5mm slotted)
• Drainage butterfly valve
• Discharge chute
• Guards designed to comply with Machinery Directive
• Emergency stops (4nr)
• Tank capacity 20,430 litres (4,500 UK gallons) (5,400 USgallons)
• 300mm high support legs
• 11.0 tonnes unladen weight
• Long fines recovery spiral with optional 1.5m extended spiraltank

• Electric hydraulic drive 7.5kW
• Steel lined discharge chute
• 1.5m main body and spiral extension
• Dewatering screen complete with structure

Please Be Sure To Check Out Our Entire Mobile Bucket Wheel Range

17 Sep T 150 Mobile Bucket Wheel Dewaterer

Posted at 05:44h in

The T Range is designed to operate with maximum versatility and can support different requirements such as maximum retention of fines or maximum disposal of fines.

The T Range can be driven hydraulically from the M Range or from its own optional electric power pack.

FEATURES AND BENEFITS
• Can recover 1 or 2 grades of sand from wet feed or bolt-on boiler box option for direct dry feed
• High capacity variable speed twin bucket wheel providing increased drainage time for a drier product
• Deep fluted variable speed fines screw provides excellent fines recovery
• Anti-turbulence inlet boxes and weir discharge system allows consistently calm settling conditions
• Can be powered electrically or can be hydraulically coupled to an M-Range mobile screen
• Low running costs, low maintenance & simple operation
• Static or site transportable with jacking legs and tow bar

17 Sep SW 200 Sand Screw

Posted at 05:30h in

The Heavy Duty Terex® SW 200 is a twin screw fine material washer, classifier and dewaterer. The recommended maximum material size is 3/8” (10mm). The approximate capacity of the SW 200 Sand Screw is 100-200 TPH, which is approximately twice the capacity of the SW 100.

FEATURES AND BENEFITS
• Heavy duty single or twin dewatering screws (36” x 25”) for high capacity
fines recovery.
• Robust easy to assemble steel construction
• Independent electric drive on each screw for maximum torque under load
• All electric plant which can easily integrate with other Terex equipment
• Low maintenance & simple operation

17 Sep SW 100

Posted at 05:25h in

The Terex® SW 100 Sand Screw is a single screw fine material washer/classifier/dewaterer. The recommended maximum material size is 3/8” (10mm). The approximate capacity of the SW 100 Sand Screw is 50-100 TPH.

17 Sep M 166S Sand Screw

Posted at 05:14h in

Terex Washing Systems offer a range of sand screw options to fit your needs including the M 166S Sand Screw. The screens range in size from 5’ x 16’ to 6 ’x 20’ and are teamed with single or twin dewatering screws. They are outfitted with strategically placed nozzles to scrub materials clean.

High capacity dewatering screws deliver the fine aggregates while chutes and cross conveyors deliver the sized products. The portable chassis design is easy to transport to the desired site and easy to set up.

FEATURES

Tripled deck inclined screen produces 3 grades of washed aggregate and 1 grade of sand
Each spraybar has individual flow valves for complete water control
Heavy duty twin dewatering screws (36” x 25”) for high capacity fines recovery.
Robust I-beam construction chassis with double or triple axle suspension allowing for easy transportation and quick set-up
All electric plant pre-wired to control panel or isolators to integrate with other Terex equipment
Walkway access around three sides of the screen
Integrated drainage and washout features for easy maintenance

17 Sep FM 200 SUPERFINES

Posted at 03:54h in

The Terex® FM Superfines Range is a static fines recovery unit. It brings together on one chassis, centrifugal slurry pump, four hydrocyclones, a collection tank and a 12 x 5 or 14 x 6 dewatering screen. It can produce one grade of sand classifying at approximately 40 micron and is designed to work in conjunction with the TWS range.

• Static sand recovery unit on one chassis
• 2 centrifugal slurry pumps
• 4 hydrocyclones
• Collection tank
• 14 x 5 dewatering screen
• Produces one grade classifying at approximately 40 micron
• Designed to work in conjunction with Terex Washing Systems range

• Maximum recovery of material above 40 μm (400 mesh)
• Removes silt, slimes and clays below 40 μm (400 mesh)
• Removes water following dewatering operation to 10–15% of residual water content
• Major reduction in fine material discharging to the water management system, thus reducing recovery cycle and saving money
• Heavy-duty robust construction ideal for rugged operating environment
• Low maintenance
• All wear areas rubber lined
• Walkway and access steps
• Quick assembly time
• Centrifugal slurry pump
• High frequency 14×5 de-watering screen fitted with polyurethane modular mats
• Four rubber lined G4 Hydrocyclones which classifies at approximately 40 μm (400 mesh)
• Self-regulating cyclone tank complete with built in float system

• Bolier box for dry feed

•Electrical control panel

•Dewatering screen spraybars

17 Sep FM 200BW Dewatering Unit

Posted at 03:48h in

The Terex® FM 200 Bucket Wheel is a highly efficient dewatering unit. It has the capability to remove silts, slimes and clays from sand to produce up to 2 saleable products.

FEATURES AND BENEFITS
• Can recover 1 or 2 grades of sand from wet feed or bolt-on boiler box option for direct dry feed
• Maximum recovery of saleable material through the removal of silt, slimes and clays below 75μm (200 mesh)
• Variable speed bucket wheel processes 80-90% of material, reducing wear on the rubber lined pumps & cyclones
• Major reduction in fine material discharging to the water management system, thus reducing recovery cycle and cost
• Low maintenance & simple operation with self regulating sump tank
• High frequency dewatering screen reduces residual water content in your final product to 10–15%
• All electric plant pre-wired to control panel or isolators to integrate with other Terex equipment

17 Sep FM 120BW Bucket Wheel Sand Washer

Posted at 03:41h in

The Terex® FM120BW bucket wheel is a classification plant that removes silts, slimes and clays from sand to produce up to 2 saleable products. It is capable of working in applications such as concrete, mortar and asphalt sands, quarry dust/crushed fines, lake and beach sands, silica sand, golf course sands, filter bed sands, recycled materials and iron ore.

17 Sep FM 60BW Dewatering Bucket Wheel

Posted at 03:36h in

The FM60BW, a dewatering bucketwheel, has the capability to produce one sand.

FEATURES & BENEFITS
• Static sand recovery unit on one chassis
• A dewatering bucket wheel
• Centrifugal slurry pump
• Hydrocyclone
• Collection tank
• 8 x 4 dewatering screen
• Produces one grade of sand
• Designed to work in conjunction with Terex Washing Systems range

17 Sep FM 200C Sand Recovery Unit

Posted at 03:30h in

The Terex® FM 200 Compact Sand Recovery Unit combines a collection tank, centrifugal slurry pump(s), hydrocyclone(s) and a dewatering screen on a single chassis.

Available options include a Boiler Box for dry feed, Electrical Control Panel and Spraybars on dewatering stations.

FEATURES & BENEFITS
• Can recover 1 or 2 grades of sand from wet feed or bolt-on boiler box option for direct dry feed
• Maximum recovery of saleable material through the removal of silt, slimes and clays below 75μm (200 mesh)
• Robust easy to assemble steel construction complete with galvanized walkway & handrails provide easy access
• Low maintenance & simple operation with self regulating cyclone tank
• Pumps & cyclones have replaceable rubber liners for extended wear life
• High frequency dewatering screen reduces residual water content in your final product to 10–15%
• All electric plant pre-wired to control panel or isolators to integrate with other equipment