The Terex® FM Compact range are static sand washer recovery units designed to be both cost and energy efficient. The range uses centrifugal force within the cyclone(s) to remove clay, silt and slime from sand to bring it into specification. The range combines a collection tank, centrifugal slurry pump(s), hydrocyclone(s) and a dewatering screen on a single chassis.

• Can recover 1 or 2 grades of sand from wet feed or
bolt-on boiler box option for direct dry feed
• Maximum recovery of saleable material through the
removal of silt, slimes and clays below 75μm (200
mesh)
• Robust easy to assemble steel construction
complete with galvanized walkway & handrails
provide easy access
• Low maintenance & simple operation with self
regulating cyclone tank
• Pumps & cyclones have replaceable rubber liners for
extended wear life
• High frequency dewatering screen reduces residual
water content in your final product to 10–15%
• All electric plant pre-wired to control panel or
isolators to integrate with other equipment

FM 60C Static Sand Recovery Features and Benefits

• Underflow rubber lined slurry pump.
• One rubber lined hydrocyclone which classifies at approximately 75 μm (200 mesh).
• Self regulating cyclone tank complete with built in float system and Anti-turbulence sections.
• High frequency 2.4m x 1.2m (8’ x 4’) dewatering screen fitted with polyurethane modular mats
• Maximum recovery of material above 75 μm (200 mesh).
• Removes silt, slimes and clays below 75 μm (200 mesh).
• Removes water following dewatering operation to 10–15% of residual water content.
• Major reduction in saleable material discharging to the pond,thus reducing pond maintenance and saving money.
• Heavy-duty robust construction ideal for rugged operating environment.
• Low maintenance
• All wear areas rubber lined
• Walkway and access ladder
• Quick assembly time
• Broken down into one 40’ container for transport

Options

• Boiler box for dry feed
• Electrical control panel
• Spraybars on dewatering screens